| |
 |
Inner rotor kit,
improves power and allows you to adjust the timing. For racing use only.
Priced at nearly 60,000 Yen !! |
 |
 |
Super cross mission
kit for the NSR 50 or 80. Cost is around 58,000 yen for the whole kit
and it fits mini NSR models from frame number AC08-1300001 |
| |
 |
Here is the Bore
up piston and cylinder kit for the NSR 50. It increases your engine size
to 63cc and the cost is 24,800 Yen. It is sold as a complete kit and requires
no machining for instant power !! Sorry no full size image !! |
| |
 |
This is the Kitaco
Mikuni big carb kit for the NSR 50 and 80. It's diameter is 20mm and it's
priced at about 14,000 for the whole kit, instant power and requires no
re-jetting ( usually ) |
| |
 |
This is the 24mm
Mikuni big carb kit for the NSR 50 and 80. It is also a complete bolt
on kit and priced at about 20,000. Designed for racing or heavy street
use. |
| |
 |
This is the biggest
carb kit you can get for your NSR 50 or 80. It's 28mm in diameter and
made by Keihin. Priced at 25,000 Yen it comes complete with a high throttle
kit and all necessary parts for the conversion. For racing use only !! |
|
 |
Super Jet filters
that work with your normal air box. Slight power increase with out the
need to adjust carb setting. 1,700 Yen for the NSR 50 or 80 |
| |
 |
This is a universal
batteryless kit which fits most 12volt bikes. It's necessary to add this
part when you remove your battery for racing use so not to damage your
electrical system. It's priced at about 4,800 Yen for the entire kit. |
|
 |
Racing back step
kit for the NSR 50 or 80. Priced at around 27,000 Yen for the entire kit. |
|
 |
Kitaco's amazing
aluminum swingarm for the NSR 50 or 80. Tow types are available. Standard
length is priced at about 38,000 and a 10 cm longer swingarm is available
for about 43,000 Yen. |
|
 |
Floating Disk
rotor for the NSR 50 or 80. Designed for racing and heavy duty use. Priced
at around 20,000 Yen |
|
 |
Up style handle
bar kit for your NSR 50 or 80. It's priced at around 36,000 Yen for the
entire kit. |
|
 |
GP style front
fenders made of high quality fiber glass with a single built in fog light.
Three colors available. Priced at around 17,000 Yen. |
| |
 |
Rear fender and
chain guard kit for the NSR 50 or 80. Price is about 8,000 Yen and is
available in black or white. |
Kitaco
makes a wide variety of parts for all mini motorcycles. They have some
of the highest quality parts you can buy for your NSR 50 or 80. Take me
to the Official Kitaco
Page for more about them but please note it is all in Japanese, look
for the MINI 2ST section.
